0574-62656998 kaiyuan99@163.com
ULTEM™ 1000B film is a high performance thermoplastic Polyetherimide material. The combination of high temperature resistance, flame resistance, low moisture absorption and excellent dielectric properties makes ULTEM film a good candidate for a broad range of electrical and electronic applications. ULTEM film products are thermo-formable and can be heat-sealed to a wide variety of materials.
TYPICAL PROPERTY VALUESu
PROPERTY | TEST METHOD | UNITS | VALUE |
Mechanical | |||
Tensile Modulus | ISO R527 | MPa | 3000 |
Tensile Strength @ Yield | ISO R527 | MPa | 100 |
Tensile Elongation at @ Yield | ISO R527 | % | 6.5 |
Tensile Strength @ Break | ISO R527 | % | 60 |
Tear Strength Initiation @75 µm | ASTM D1004 | N/mm | 360 |
Tear Strength Propagation @75 µm | ASTM D1938 | N/mm | 3.5 |
Thermal | |||
Coefficient of Thermal Expansion | IPC-TM-650 | ppm/°C | 52 |
Shrinkage @ 170°C EXT. DIR. | IPC-TM-650 | % | 0.33 |
Shrinkage @ 170°C CROSS. DIR. | IPC-TM-650 | % | 0.24 |
Glass Transition Temperature | DMA | °C | 217 |
Thermal Conductivity | ASTM C177 | W/m°C | 0.22 |
Physical | |||
Specific Gravity | ISO 1183 | g/cc | 1.27 |
Water Absorption, immersion,23°C, 24 hr | ASTM D570 | % | 1.25 |
Water Absorption, 50%RH,23°C, 24 hr. | ASTM D570 | % | 0.48 |
Electrical | <2 | ||
Dielectric Strength @ 125 μm oil | ASTM D149 | Volts/mil | 3,650 |
Dielectric Constant | IPC-TM-650 | 3.2 | |
Dissipation Factor | IPC-TM-650 | 0.005 | |
Volume Resistivity | ASTM D257 | M ‘Ω-cm | 2.5 x 1015 |
Surface Resistivity | ASTM D257 | M ‘Ω | 1.9 x1016 |
Flammability | |||
UL Performance (75 - 175 µm) | UL94 | VTM-0 |
u These are typical properties and are not intended for specification purpose
Standard gauges : 25µm (0,001”) +/-5% - 250 µm (0,010”) +/-5% Standard roll width : 1270 mm (50”)
Texture : Smooth / fine matte
Color code 1000
Color : Natural amber
余姚市禾野新材料有限公司
HEYE Plastic Technology Co., Ltd
Tel: 0574-62538925
Fax: 0574-62538925
地址：浙江省余姚市中国塑料城东区3-23号
薄膜销售
Mobile: 133 0584 1879 沈天瑞
